Plextone Terrazzo

Plextone Terrazzo

 

Advantages of Multicolor Paint over Vinyl Chipping for Floors

1) Save labor and time by spraying vs broadcasting chips onto wet floor.
2) Can be applied to epoxy base coat whether tacky or dry and dries in one hr.
3) Do not need to rebroadcast bare spots or brush off excess, one coat coverage.
4) Top coat with epoxy or polyaspartic at half the thickness, 5 to 7 mils vs 15 mils so save cost on using less top coat for the contractor.
5) Multicolor lays flat so surface not rough or needs sanding and easier to keep clean because dirt lodges in cavities of uneven surface.
6) Can knock down gloss using steel wool buffer without dislodging chips.
7) Vertical hold of spray coating allows border molding of same color as floor.
8) Cost of material is about $.75 per sq ft same as vinyl chips full broadcasting based on coverage of 75 to 100 sq ft per gallon.
9) Touch up with HVLP gun or small cup gun modified using compressed air feasible since multicolor has camouflage effect and blends in after rough sanding and repair for broken or scored floor.
10) Proven track record of multicolor paint on architectural spec jobs CSI spec available and years of service on commercial sites and public spaces.
11) Very low VOC water base paint meeting Green seal requirements and LEEDS certification for credits 50 grams per liter or less.
12) In light traffic areas, no need for top coat as excellent scrub and abrasion resistance.
Click to download Miraglaze brochure